As an Amazon Associate I earn from qualifying purchases.
1. BETAFPV #ad
BETAFPV BT2.0 1S Battry Charger Board Adapter 4.35V for BT2.0 1S FPV Battery Like 300mAh 1S 450mAh 1S Lipo Battery with BT2.0 Connector Charger Board & Adapter #adBETAFPV #ad
- 2 channels BEC for supply current. You can use xt60 adapter or 3s/4s batteryXT60 Input as supply power so you can continuously charge. Spport charging 6pcs bt2. 0 connector batteries at the same time, Individual charging per ports, not parallel.
3s battery-- 3s button, 4S battery-- 4S button. Note: if you plug battery with xt60 connector, please switch to corresponding Input voltage button. Or batteries will unable to be charged. Turns itself off when supply battery reaches safe low-voltage. Led lights indicate when each battery is done charging.
2. BETAFPV #ad
BETAFPV BT2.0 1S Battery Charger Voltage Tester Type-C Charger V2 4.35V/5V 1A/2A for 1S Lipo RC Battery Like 300mAh 1S 450mAh 1S 260mAh 1S with BT2.0 Connector #adBETAFPV #ad
- Lightweight and easy to carry. Type-c input portbt2. 0 battery charger voltage tester designed with Type-C input port to replace the USB port. When power-on, the red LED means charging while the green LED is fully charged.
Bt2. 0 battery charger&voltage testerthis bt2. 0 battery charger voltage tester is customised for RC battery with BT2. 0 connector, can also be charged PH2. 0 connector battery when you use PH2. 0-bt2. 0 adapter cable.
The charging is no longer limited by the socket, provides pilots more charging options. Updatedcompared with the original bt2. 0 battery charger voltage tester, BT2. 0 battery charger voltage tester V2 comes with the hidden design of the electric display and charging instructions, which is simple and beautiful.
How to usewhen power-off, the test port can be used as a battery tester while another port does not possess any function. The charging current is up to 2A, which improves its efficiency and shorten the charging time. High efficiencyit supports charging 2 lipo batteries with BT2. 0 connector at the same time.
3. BETAFPV #ad
BETAFPV 1S LiPo Battery Charger Board 6 Ports Type-C Portable Charger 4.35V 1A 1S LiHV Charger for 1S RC Drone Quadcopter Lipo Battery with BT2.0/PH2.0 Connector Like 300mAh 1S Lipo Battery #adBETAFPV #ad
- Otherwise, the battery life will be reduced or the battery will be damaged. 6-port simultaneous charging can be achieved, and a single-port charging current can reach 1A if you use 30W adapter.
But please do not charge 2 batteries in one port at the same time. You can get 6pcs BT2. 0 300mah 1s battery of a full charge in 25mins if you are using 30W fast charging adapter. It is convenient to use type-c cable to charge through PC, power bank, etc.
2 types battery portsbetafpv 6 ports 1s charger is designed for charging 1s lipo battery with BT2. 0 connector and PH2. 0 connector. Charging protocolsthis 1s lipo battery charger board supports pd3. 0, bc1. 2, qc3. 0, etc. Designed&led lightsthis portable charger board is designed and manufactured by BETAFPV. 30w inputit supports a maximum input of 30w. Fast charging protocols. Led lights indicate when charging status of each battery.
4. Crazepony #ad
Crazepony 1S LiPo Battery Charging Board Blade Inductrix Ultra Micro JST-PH Parallel Connect Plate mCX mCPX #adCrazepony #ad
- Output connector: 6x micro jst 1. 25; 6x jst-ph 2. 0 . Charge 6 batteries at the same time, keep your tiny whoop staying in the air. Suitable for battery of blade inductrix, nano QX 3D, Nano CP X, mCP X, Glimpse, Nano QX etc.
Board size: 62. 5x32x5mm, weight: 17g 06ounces. Input charge connector: male 4mm Banana Plug, it needs to connect to LiPo charger for charging battery.
5. Crazepony #ad
1S LiPo LiHv Battery Charger 6 Channel Parallel Charging Board with GNB27 and PH2.0 Connector for Tiny Whoop Blade InductrixS22 #adCrazepony #ad
- And the later period of the balance charging cycle is shorted substantially. Reduce charging time : charge 6 lipo batteries at the same time Need to consider width of battery when used with a balance charger, instead of balancing batteries one by one, effectively save your time.
Built-in short circuit protection : equipped with 20A fu-se protection able to handle the large battery pressure, can protect the charging batteries when short circuit happens.
Avoid overcharging : it can prevent each cell overcharge, so it can improve the balance efficiency. Updated charging board for gnb27 battery: equipped with gnb27 and jst-ph 2.
0 connector, allows you to charge the 1s lipo battery with GNB27 plug directly, nano cp x, no need to adapter or DIY. Applications : the balanced charging Board used for simultaneously charging multiple lithium batteriesincluding LiPo, LiFe, and Li-ion types. Suitable for battery of blade inductrix, mCP X, Nano QX 3D, Glimpse, Nano QX etc.
6. BETAFPV #ad
BETAFPV 1S Lipo LiHV Charger Board 1S LiPo Battery Charging Plate 4.2V/4.35V for Tiny Whoop Blade Inductrix JST-PH 2.0 Micro-JST 1.25 HV Lipo Battery #adBETAFPV #ad
- Turns itself off when supply battery reaches safe low-voltage. Charge 1s lipo batteries 4. 2v and hv Lipo batteries 4. 35v at once in the same board by a selectable switch. Individual charging per ports, not parallel.
Xt60 input 3s or 4s for field charging. 2 channels bec for supply current. Could charge up to 6 pcs batteries with Picoblade 1. 25 or jst pH2. 0 power plug at once. Led lights indicate when each battery is done charging. 400mah current per charge port.
7. Tenergy #ad
MCX, Molex/Losi, Tenergy T420 4-Channel Charger for 1S LiPo/LiHV Rechargeable Battery Packs, Built-in JST/BEC, MCPX Connectors #adTenergy #ad
- Quality built - tested and certified for safety and quality by international standards set by CE, over-charging, and Rohs. Tenergy's lihv charger also includes built-in advanced safety features gaurding agianst short circuits, over-current, FCC, over-heating, and reverse polarity.
Flexible inputs/outputs- recharge on the go with dc power sources, or in the comfort of your own home with AC input power sources.
High voltage charger – spend more time with your hobbes by recharging up to 4 Lipo/LiHV battery packs at once with Tenergy's T420 high voltage charger.
Tenergy's t420 charger also includes 4 built-in connectors for JST/BEC, Molex/Losi, MCX, MCPX. Fast charge - customizable charging speeds enables fast charge or slow charge for a more fully charged battery pack experience. Backlit lcd screen - quickly get detailed information about each battery pack on the easy-to-read LCD screen.
8. BETAFPV #ad
BETAFPV 4pcs BT2.0 450mAh 1S Battery 4.35V 30C/60C FPV Lipo with BT2.0 Connector for FPV Tiny Whoop 1S Brushless Whoop Drone Like Meteor75 Tiny Whoop #adBETAFPV #ad
- High qualityhigh-end technology to guarantee high quality and consistent performance. 1. 0mm banana connectorbt2. 0 connector aka 1. 0mm banana connector decreased internal resistance of connector effectively by upgrading the crimped pins to 1.
0mm banana connector and increasing the cross-sectional area of 1. 0mm banana connector. Pilots can enjoy more flight time without disturbance of low voltage warning.
If any problem with our product, please feel free to contact us. High efficiencybt2. 0 450mah 1s 30c battery has stable current/voltage output and high efficiency.
More durablecompared with the ph2. 0 crimped pins, BT2. 0 connector is more durable which can discharge more currents in the same capacity and provide far more power. All 1s brushless drones will gain powerful and perfect performance with it. Discharge rateby solving the problem of voltage sag, the discharge of the 450mAh 1S BT2. 0 lipo becomes more efficient.
9. SoloGood #ad
TATTU 5pcs 300mAh 1S Battery 3.8V 75C Lipo Battery with PH2.0 Plug Connector for RC FPV Racing Drone Quadcopter #adSoloGood #ad
- We specialize in the rc drone and drone market with industrial quality, and provide you with high-quality batteries. Our slogan "less is more", "more" means more flight time, more enjoyment, and "less" means less weight, and more satisfaction, simple design.
All packaging are made of shockproof and fireproof materials and our battery box to protect your battery. 123. If there are any question or need any help, pls feel free contact us, we will always here help you out within 24 hours.
10. ICQUANZX #ad
ICQUANZX B6 V3 Lipo Charger Balance Charger Discharger for LiPo/Li-ion/Li-Fe/LiHV Battery 1-6S,NiMH/NiCd 1-15S,PB 2-24V,LCD Display with Power Supply #adICQUANZX #ad
- Wide voltage compatibility - use the battery pack balance charger on lipo/li-ion 3. 7v-22. 2v（1-6 cell）;lifepo4 3. 2v-19. 2v 1s-6s;lihv: 1-6 cell; NiMH/NiCd 1. 2v-18v 1a-15s;pb: 2-20v; smart battery: I, II, III. Package includes-the battery balance charger comes with 1×battery charger; 1×adapter; 1×Charging cable with XT60 and T-plug; 1×Crocodile clip;1 x Power Adapter.
Multiple functions -except charge, it also has these functions: terminal voltage control; lithium battery Capacity & Voltage Checking; Battery Internal Resistance Checking, balance and discharge, Let you know when a cell is going bad;Data Storage and Memory LoadingStore up to 20 packs in memory; Digital DC Power.
Automatically identify the cells counts of lithium battery section. Support LiHV battery.
So it is very useful. Universal voltage compatibility - 80w high power, data storage, Max 6A charging current, this rc lipo balance charger can balance, fast charging, cyclic charging and discharging and much more for all of your battery packs. High quality & safe- using superior chip and materials to deliver quality performance, Over-Charge Protection, and the charger is designed with Reverse Polarity Protection, Short Circuit Protection, Over-Current Protection and Over-Temperature Protection for safety.